Tackling Small Home DIY's and Pretending To Know What I'm Doing pt. 1

My laminate countertop after I sanded and cleaned the surface.

 I admit it, I am a bit of a home improvement diy wannabe. If I were a Spice Girl, I'd be "Crafty Spice," because I need to create. Growing up, I watched endless hours of  This Old House and Hometime on PBS. When the diy channel and HGTV became available on my cable channel package, I was a bit excited in a very dorky kind of way. To me, an idea of a good time is to cuddle up to my husband and watch Chip and Jo Jo and marvel at the before and after. When we were first able to get into our house last year, my husband spent a lot of time removing carpets and gutting the bathroom, while I scrubbed and painted walls. My kitchen needed love. When we are totally done with the kitchen, I will do an entire post on the before and after. Here I just want to show what I did to my countertops since I needed to re-paint a section last week. **I am not a professional. I am a novice, a housewife who experiments with inexpensive diy solutions. This is not recommended as a tutorial, it is simply a "show and tell" type of post. I am NOT an expert, I'm just showing you what I did..**

Adding a layer of primer.

 When we moved into our home it needed a lot of TLC. Most of it was on the surface. The old gal just needed a makeover with a little nip-tuck in one area. The rest of the makeover just involved some fresh paint, flooring, and curtains. With a bit of wall art, throw pillows and candles here and there. Since there was a lot of little things and an entirely new bathroom to install, keep on a tight budget was our only option. We didn't have the time nor the money to fuss about with installing new countertops. So, I did some research on Pinterest ( something I did A LOT during our home makeover) and I found a solution for updating our countertops for very little money. I bought a can of black chalkboard paint for $10.00 and a small foam roller for around $5 (we already had the roller handle, we just needed more sponge rolls). I already had a can of paint latex with a built-in primer, so I used that to prime the surface. The first time I did this last year, I skipped sanding the countertops. I shouldn't have done that, but I was in a rush. I recommend sanding the laminate surface and cleaning it so that the paint can really adhere to the laminate countertop. Since I skipped that step, it peeled off last week, which was why I had to do it again. This time I did it the right way.

My laminate countertop after the primer had dried.

 After sanding and cleaning the surface, I painted two layers of primer on the entire area. I made certain to really let these dry before adding another coat. This primer and the chalkboard paint took twice as long to dry because it was very humid outside.

My laminate countertop after I painted a few layers of chalkboard paint onto the surface.

 Once the primer was dry, I painted three coats of chalkboard paint, making sure the layers were dry before adding another. I really should have let each coat dry for a day to harden properly, but when you have pets trying to jump on the countertops and you need to use the countertop, that is hard to do. I should have waited a day to let things really dry and made sure to do it when it isn't humid. After all of my hard work, once hot dinner plate on the paint made the paint bubble and peel away. This didn't happen last year because we weren't living in the house yet, so it had plenty of time to harden, not to mention it was colder and not at all humid. I have covered the spots with electrical tape in order to conceal the spots and also to protect the paint from peeling even more.

The end result after two layers of wax.

Once the paint was dry, I smoothed on a layer of butcher's wax all over the top surface and I waited for it to dry. After the wax hardened I buffed the wax until shiny and smooth, then I added one more layer for extra measure. I really do love the look of this, it's a fantastic solution for revamping a laminate countertop when you are on a budget. Down the road, we will be replacing these, but for now, this works. The only thing that I didn't use to make this a total success was PATIENCE. If you don't let the paint harden for at least 8 hours after it has dried, it will not set correctly. It's a lot like painting your fingernails. If you add a base coat, you let it dry before adding your nail color. If you don't let you nail color harden between coats and then try to add a topcoat, the nails never dry completely and your nails smudge.
When the weather changes to more Fall-like weather and the humidity finally dissipates, I will touch up the spots to peeled. Until then, the tape covers it nicely, the color is an exact match, fortunately! This post proved to be longer than I had expected. So, I will post about my other diy project in the next post. This post isn't meant to be a tutorial by any measure. I am a novice who needed an inexpensive solution and this is how I solved my problem. There is paint made specifically for countertops, but those kits are so pricey, that you might as well buy a new countertop for the price. This is what I did for my home and it worked, but it still needs to be corrected in a few areas. At any rate, I hope you enjoyed my little experiment.
 Until next time~ Toodahloo!